Vinegar Bottle Filling Machine, Water Filling Machine

General description

The bottle enters the rinsing part of the three-in-one machine through the air conveyor. The gripper installed on the rotary disk catches the bottle and turns it over 180 degrees and makes the bottleneck face ground. In the special rinsing area, the nozzle on the gripper sprays juice to rinse the bottle inwall. After rinsing and draining, the bottle turns over 180 degrees along the guide rail and makes the bottleneck faces the sky. Then rinsed bottle is transferred to the filling part by poking the bottle starwheel. The bottle that enters into the filler is held by a neck holding plate. The filling valve acted by the cam can realize up and down. It adopts a pressure-filling way. The filling valve opens and begins filling when it moves down and touches the bottleneck, the filling valve moves up and leaves the bottleneck when it finishes filling, the full bottle is transferred to the capping part through the hold neck transition poking wheel. The stop screwing knife holds the bottleneck and keeps the bottle upright not rotating. The screw capping head keeps in revolution and autorotation. It can finish a whole capping course including catching, pressing, screwing, and discharging through the action of the cam. The full bottle is transferred to the bottle outlet conveyor to the next process through the starwheel. The whole machine is enclosed with windows, the height of the enclosed window is higher than the peak of the 3-in-1 machine, in the bottom of the enclosed window has a return air outlet.

Technical parameter: